Efficient synthesis of 3H-imidazo[4,5-b]pyridines from malononitrile and 5-amino-4-(cyanoformimidoyl)imidazoles

1-Aryl-5-amino-4-(cyanoformimidoyl)imidazoles 2 were reacted with malononitrile under mild experimental conditions and led to 3-aryl-5,7-diamino-6-cyano-3H-imidazo[4,5-b]pyridines 5, when the reaction was carried out in the presence of DBU, or to 3-aryl-5-amino-6,7-dicyano-3H-imidazo[4,5-b]pyridines 3, in its absence. Both reactions evolved from the adduct formed by nucleophilic attack of the malononitrile anion to the carbon of the cyanoformimidoyl substituent. A 5-amino-1-aryl-4-(1-amino-2,2-dicyanovinyl)imidazole 4 was isolated when this reaction was carried out in the presence of DBU. The structure of compound 4 was confirmed by spectroscopic methods and by reaction with triethyl orthoformate and with acetic anhydride, leading respectively to 9-aryl-6-(cyanomethylidene)purines 11 and 12. Imidazole 2b was also reacted with ethyl acetoacetate, a carbon acid with a pK(a) comparable to that of malononitrile. Similar reaction conditions were used and the product isolated was a 6-carbamoyl-1,2-dihydropurine 10, showing that a different mechanism was operating in this case.     

Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

Total syntheses of four stereoisomers of 4alpha-hydroxy-1beta,7beta-peroxy- 10betaH-guaia-5-ene

[reaction: see text]. The first total syntheses of four stereoisomers of 4alpha-hydroxy-1beta,7beta-peroxy-10betaH-guaia-5-ene are reported starting from the readily available (+)-dihydrocarvone. These compounds have been synthesized from dienes (-)-isoguaiene and (-)-10-epi-isoguaiene by tandem ene hydroperoxylation-[4 + 2] cycloaddition with O(2) followed by selective reduction. The structure of the natural 4alpha-hydroxy-1beta,7beta-peroxy-10betaH-guaia-5-ene isolated from Liabum floribundum has been confirmed.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Rhodium(I) carbonyl complexes with α-diimine ligands containing amino or hydroxy substituents

-Diimines, RN:C(R)C(R):NR(LL) derived from glyoxal, GLL (R=H) abbreviated as GAA (R= R=4-dimethylaminophenyl) or GHA (R= R=4-hydroxyphenyl), and derived from biacetyl, BLL (R=Me) abbreviated as BDH (R=R= NH₂), BOH (R=NH₂, R=OH) react with carbonylrhodium(I) compounds to give different products depending on the imino substituents in the ligand and/or the solvent employed. The reaction of -diimines bearing amino groups, such as GAA or BDH with [RhCl(CO)₂]₂ in acetone yields binuclear [RhCl(CO)₂]₂(-LL) while in CH₂Cl₂ ionic [Rh- (CO)₂(LL)]⁺[RhCl₂(CO)₂]^– species are obtained. In acetone [RhCl(CO)₂]₂(-GAA) exists as an equilibrium mixture between two different neutral binuclear species; [Rh(CO)₂(BDH)]⁺ exists as a mixture of two species containing chelate or monodentate bonded diimine respectively. GAA or BDH react in situ with [RhCl(CO)(C₂H₄)]₂ in benzene to yield tetracoordinated monocarbonylated [RhCl(CO)(LL)] compounds. -Diimines (LL) bearing hydroxy groups, such as GHA or BOH react with [RhCl(CO)₂]₂ or [RhCl(CO)(C₂H₄)]₂ to give pentacoordinated dicarbonylated [RhCl(CO)₂(LL)] compounds.     

A peroxidase-tetrathiafulvalene biosensor based on self-assembled monolayer modified Au electrodes for the flow-injection determination of hydrogen peroxide

The construction and performance under flow-injection conditions of an integrated amperometric biosensor for hydrogen peroxide is reported. The design of the bioelectrode is based on a mercaptopropionic acid (MPA) self-assembled monolayer (SAM) modified gold disk electrode on which horseradish peroxidase (HRP, 24.3 U) was immobilized by cross-linking with glutaraldehyde together with the mediator tetrathiafulvalene (TTF, 1 μmol), which was entrapped in the three-dimensional aggregate formed.

The amperometric biosensor allows the obtention of reproducible flow injection amperometric responses at an applied potential of 0.00 V in 0.05 mol L⁻¹ phosphate buffer, pH 7.0 (flow rate: 1.40 mL min⁻¹, injection volume: 150 μL), with a range of linearity for hydrogen peroxide within the 2.0 × 10⁻⁷–1.0 × 10⁻⁴ mol L⁻¹ concentration range (slope: (2.33 ± 0.02) × 10⁻² A mol⁻¹ L, r = 0.999). A detection limit of 6.9 × 10⁻⁸ mol L⁻¹ was obtained together with a R.S.D. (n = 50) of 2.7% for a hydrogen peroxide concentration level of 5.0 × 10⁻⁵ mol L⁻¹. The immobilization method showed a good reproducibility with a R.S.D. of 5.3% for five different electrodes. Moreover, the useful lifetime of one single biosensor was estimated in 13 days.

The SAM-based biosensor was applied for the determination of hydrogen peroxide in rainwater and in a hair dye. The results obtained were validated by comparison with those obtained with a spectrophotometric reference method. In addition, the recovery of hydrogen peroxide in sterilised milk was tested.     

Preparation and Characterisation of Nano-Structured WO<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> Layers for Photoelectrochromic Devices

Nano-structured WO₃-TiO₂ layers were prepared by the sol-gel route. To obtain transparent, porous and crack free layers up to 0.8 μ m with a single dipping cycle a templating strategy was used. As a template three-dimensionally network based on organically modified silane was introduced to the WO₃ and TiO₂ sols. The WO₃ layers were dip-coated onto the conductive glass substrate (TCO) and the TiO₂ layers on the top of the WO₃ layer. The morphology and the structure of the layers were determined by Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HR-TEM), Energy Dispersive X-Ray Spectroscopy (EDXS), Auger and Infrared spectroscopy. SEM image of the WO₃-TiO₂ layer confirmed the nano-porosity of the layers and give the size of the particles of about 10 nm for TiO₂ and 30 nm for WO₃ layer. Further analysis indicated that the titanium sol penetrates the WO₃ layer. Particles in the WO₃ layer consist of a crystalline monoclinic WO₃ core surrounded by a 5–10 nm amorphous phase consisting of WO₃, TiO₂ and SiO₂. The WO₃-TiO₂ layers were used to assemble all solid state photoelectrochromic (PE) devices. Under 1 sun irradiation (1000 W/m²) the visible transmittance of the PE device changes from 62% to 1.6%. The colouring and bleaching processes last about 10 minutes.     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

Speciation of the new ligand di-isopropyliminodiacetoamide with Cu(II) using computational processing and graphical methods

The importance assigned to chelating agents in diverse areas has impelled studies concerning their development as related to metal ions representing a biological concern. The synthesis of di-isopropyliminodiacetoamide (D) is presented in this work. The acidity constant obtained for D was pKa = 5.79 +/- 0.04 with the aid of program SUPERQUAD. The equilibrium constants for D with Cu(II) were obtained with the aid of program SQUAD for CuD2+ and CuD2(2)+ species giving log beta1 = 4.795 +/- 0.002 and log beta2 = 8.374 +/- 0.004, respectively.